Product Description
The first step of the double-layer trapezoidal tile press is the
sheet conveying. Usually, it is equipped with a feeding device to
smoothly feed the metal sheet to be processed (such as color steel
sheet, galvanized sheet, etc.) into the machine. These feeding
devices generally include a powered roller, which is driven by a
motor to rotate the roller. The sheet is placed on the roller and
is conveyed to the next processing link under the action of
friction. The speed of the powered roller can be adjusted according
to production needs to match the rhythm of the subsequent forming
process.
Main Technical Parameters
| Material | Type | PPGI/GI |
| Thickness | 0.3-0.6mm |
| Width | 1200mm |
| Roller Stations | 11/13Stations |
| Roller & Shaft Material | 45# Steel Quenching and Plating |
| Diameter of Shaft | Φ70mm |
| Cutter Material | CR12 |
| Drive Type | Chain Drive |
| Speed | 15m/min |
| Total Power | 5.5+5.5KW |
| Voltage | 380V 50Hz 3Phases |
Working Flow
Decoiling → Material Feeding → Roll Forming → Cutting → Collecting
Component & Technical Parameters
This part is used to support Coil.
And make the coil in a rotary way.
Bearing capacity: 5T
Inner diameter: 470-530mm
It uses precise mechanical structure and control system to ensure
that the plate has uniform speed during the unfolding process
without any jamming, shaking or deviation.
Hydraulic Pump Station
When the equipment encounters abnormal resistance or excessive
pressure, it can automatically adjust the pressure of the hydraulic
system to avoid damage to the equipment due to overload, thereby
improving the reliability and stability of the floor deck forming
machine.
Touch Screen Control Cabinet
The control cabinet has two modes, automatic and manual modes.
The unit length of the targeted sheet and quantity can be set in the touchscreen.
The system is simple and easy to operate.
In terms of operational convenience, it is presented in an
intuitive graphical interface. Operators do not need complex
training and can easily complete various operations by touching the
screen.
Feeding Table & Pre-Cutter
The temporary loading platform after the metal coil is unwound
ensures that the plates output from the uncoiler can be placed in
an orderly manner to avoid plate accumulation and folding during
the transition process. Through reasonable design, the feeding
table can adapt to plates of different widths and weights to ensure
the stability of material placement.
Shaft & Roller
Rollers are key components for processing and forming plates. In
the leveling stage, the leveling rollers repeatedly roll the uneven
plates by applying appropriate pressure to eliminate defects such
as wavy and curved surfaces on the plate surface, so that the plate
reaches the flatness required for subsequent forming.
Pressing Section & Cutter
The material of blade is CR12.
With high strength, better hardenability and good wear resistance.
It can accurately cut the continuously formed floor decking into
pre-set lengths. This process requires not only that the cutter has
sufficient cutting force to cope with metal sheets of different
materials and thicknesses, but also extremely high precision to
ensure that the length error of each floor decking is controlled
within a very small range.
